|
 |
Mirror
Type Bluetooth Handsfree Kit (MHF-R330BT) |
|
| Products |
 |
Bluetooth Handsfree Kit |
|
|
|
|
|
|
Summary
/ Specification
/ How
to Use /
Installation Image
|
|
|
|
|
How to Use
|
|
|
|
|
>>
Installation guide
|
|
|
|
|
|
|
|
¨ç
On the back of the MHF-R330BT unit you will
see two pairs of clips. Place the bottom
pair of clips on the underside
of your existing rearview mirror. Lift the unit so that the bottom
clips extend allowing the top clips
to be fixed in position on top of your Rearview mirror
and
securely hold the handsfree unit in
place. Adjust the fitted unit to your preference for clear rear
vision.
¨è Select a suitable position for the microphone
depending on your vehicle type, this should
be placed close to the users
head - the driver sun visor is normally adequate.
"It is highly recommended to have the front
of the microphone (side with more holes) directly
facing
the operator for the best voice pickup."
The microphone can be placed either back or front of
the
visor by detaching, rotating and re-attaching
microphone holder to correct side of the
microphone.
¨é Clip a microphone on the driver's sun visor
recommended to keep a distance of
the microphone from the MHF-R330BT unit as long as
possible.
¨ê Insert the power jack of the power adapter cable
(4M).
¨ë Connect the Power Adapter Cable into its respective
socket on the MHF-R330BT
unit.
¨ì The power lead should be secured and hidden
into the vehicles interior using the seals
or joins around the windscreen
and door "A-Frame" and under your dashboard.
Ensure that you leave yourself
enough cable to be able to connect to your cigarette
lighter socket.
Note
: Please ensure that the microphone and power cable do
not interfere with the safe
operation
of your vehicle.
|
|
|
|
>>
Pairing your Bluetooth
cellular phone with the MHF-R330BT
|
|
|
|
The
MHF-R330BT supports both
HandsFree and Headset Profiles. The default profile is HandsFree.
Follow the pairing instructions for the first use, after that the
unit will pair automatically.
|
|
|
|
|
Power
On : It appears
Start on the mirror.
Voice announcement
"Power On"
|
|
|
|
|
|
|
1. When
the power is on, press the "VOL ¡ã" button
for 3 seconds.
|
2.
You will hear a beep tone. The
HandsFree unit is now ready to be
paired for the first time.
It appears Pairing
HF on the mirror.
|
|
|
|
|
|
|
|
|
|
1. Browse your
cellular phone menu and find the connectivity and / or
Bluetooth connection section.
2. Select
the "search for" a new HandsFree device function and
allow the phone to
find the MHF-R330BT.
Note : Each cellular phone
type has distinct phone menu so you may need to refer
to your
manufacture's instructions for the correct procedure on how
to
"connect a
new Bluetooth device".¡¡
3. The
Bluetooth code for the MHF-R330BT should appear
on your cellular phone
screen.
4. Press
the "connect" with the HandsFree option on your cellular
phone.
Note
: Please return to the pairing instructions if the Bluetooth
code does not
appear on
the cellular phone screen. The green LED light should flash
during
pairing.
5. The
cellular phone should prompt for a pin code. Insert the MHF-R330BT
pin code : 1 2 3 4
6. The
cellular phone should confirm that it has established a new
paired
connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.
After the above 1~2, then press the "VOL ¡ã" button
for 3 seconds again.
|
|
|
|
2. You will hear a second
beep tone,
which shows the unit is ready to
be
paired for the first time.
It appears Pairing
HS on the mirror.
The
"Headset" mode does not support
'Caller ID', 'Voice Dialling' and
'Reject Call"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No Bluetooth
connection :
No Phone
on the mirror.
¢º Press "SEND"
button in order to reactive
Bluetooth pairing link.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*
Useful Tips for Bluetooth
Connection
|
|
|
|
|
1. Should
your cellphone battery be at low charge, the Bluetooth
connection
may occasionally
be lost. To maintain good connectivity ensure that your phone
battery is adequately
charged.
2. In
case of failure of Bluetooth pairing
1) Delete item
in paired list on your Bluetooth phone
2) Reset both
phone and hands free by switching off / on
3) Reset pairing
as per procedure
3. Connection not established after pairing
-> Manually connect from the
paired phone
i.e.. My
paired devices ¡æ MHF-R330BT ¡æ Connect
4. How
to establish re-connection after pairing
->
Press "SEND" button briefly
-> Press
and hold "END" button for 5 seconds
The hands free unit will re-connect
automatically thereafter
|
|
|
|
|
>>
Using the MHF-R330BT as a HandsFree Device
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To change handsfree ring tone
(3 Ring Sound Options + 1 Voice)
press and hold "VOL
¡å" button for 5 seconds.
Display will show Elod 1, 2, 3. or O.
Set to your chosen option by repeating same procedure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The audio transfer function
is for switching the call from the HandsFree unit to the cellular
phone for a private conversation without disconnecting the call.
Switching from HandsFree to cellular phone :
Press and hold "END" button
(for
3 seconds)
Switching back to HandsFree : Press and hold
"END" button (for 3 seconds)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note
: This function only works if you
have a call waiting option with your carrier and also
another call
is actually waiting to be answered.
|
|
|
|
|
|
|
|
|
Press
and hold "SEND"
button (for 2 seconds)
It appears Voice Dial on
the mirror.
Announce name after a beep.
|
|
Note
: Voice dialling is possible only
if your cellular phone has a voice dialling capability.
Each
cellular phone type has distinct phone menu so you may need
to refer to your
manufacture's
instructions.
|
|
|
|
|
>>HandsFree
Call (Send Call) in the Car
|
|
|
|
|
Press
phone number on the cellular phone, and press
"SEND" button
of HandsFree.
Note :
If there is no sound on the loudspeaker of HandsFree unit, press
and hold "END" button for
3
seconds. Then, it will switch from Cellular Phone to HandsFree.
Private conversation option:
The operator can plug an earphone (not
included) in to the earphone jack of the MHF-R330BT for a private
conversation.
Note
: For your own safety, it is highly
recommended that the vehicle is parked in the safe place
when
plugging in the earphone.
|
|
|
|
|
|
|
|
|
|
|
|
>>
Product Constituents (Hands Free Kit)
|
|
|
|
|
|
|
|
|
|
2.
Installation on the Parking Sensor Kit
|
|
|
|
|
With a built-in
Parking Sensors by ultrasonic sensors inside the rear mirror, while
backing the vehicle, the sensor senses the distance from the right,
left, rear and indicates the distance via LED digits (0.4m~1.6m)
& left & right and also by four stages of warning signals(beep
sounds) which helps the driver while backing the vehicle.
|
|
|
|
Product
Overview
The Parking
Sensor helps the driver view the rear of the vehicle. It helps
prevent collisions and accidents during any backward movement of
the vehicle. If there is an obstacle at the rear of the car, the
alarm inside the vehicle displays the distance to the obstacle and
generates a signal proportional to it.
|
|
|
|
|
Features
of the Product
- Enables safe
backward movement by detecting obstacles in the rear.
- Insures a safe distance in the event of snow, rain, frost or fog.
- Insures a safe distance between an obstacle and the rear of the
vehicle while parking and
stopping.
- Easily installed and semi-permanent.
- Good design which matches the vehicle (Attach Type sensors).
- Displays the distance to the obstacle from the back of the vehicle
while backing-up within 0.4m.
- Informs the driver of the proximity of obstacles on the left and
right sides of the vehicle.
- Generates a four-level alarm signal depending on the distance
to the obstacle.
|
|
|
|
|
Method
of Operation
The Parking
Sensor beeps and the distance meter displays as "0.0"
as soon as you engage the reverse gear. An alarm is generated if
an obstacle is detected within the first-level detection area(within
1.6m), and the distance meter displays the distance to the obstacle.
The alarm changes as the obstacle approaches the second-level (within
1.0m) and third-level (within 0.6m) detectionarea. When the obstacle
is within 0.4m, a continuous alarm is generated. If the driver does
not hear the alarm due to noise or weak hearing ability, the distance
meter and the left/right lamps indicate the proximity of the obstacle.
|
|
|
|
|
>>
Product installation
|
|
|
|
|
|
Connecting the parking system to
the ModooFree Plus BT
Install the control box at the left or right sides of the rear seat
beyond the reach of passengers' hands.
Pull the main cable out of the windshield or pedal and connect it
to the control box.
Connect the sensor cable and the power cable to the control box.
Use the cable-tie to organize the loose cables.
|
|
|
|
|
>>
Product Constituents (Reversing Sensors Kit)
|
|
|
|
|
|
|
|
|
|
Installation
Method
|
|
|
|
|
|
|
|
|
|
After
attaching the sensor, attach the mount to the trunk and fix the
sensor cable with the cable tie. Then, pull the sensor cable to
one side of the trunk and put it in the control box.
|
|
|
|
|
|
|
|
|
|
|
Apply
the Two-sided tape to the sensor attachment. Attach the sensor
to the trunk or rear lights at about 50-80cm(20"-32")
(normally 60cm(23.5")) from the center of the car.
¡Ø Caution : The sensor may be positioned upside
down.
|
|
|
|
|
|
|
|
|
|
|
Connect
the power cable.
Generally, black cables
are (-) in vehicles.
In the case of the ModooFree Plus BT Cable, do not peel off
the cable - covering connect it using a line connector.
¡Ø Caution
- Beware of the (±) polarity.
|
|
|
|
|
|
|
|
|
|
|
B. Put up the
power cable in the line connector as "A".
C. Press the
clip with a long nose plier.
D. Close the
door of line connector.
|
|
|
|
|
|
|
|
|
|
|
Attach the
ModooFree Plus BT body onto the existing rearview mirror.
Fix the connector ay the parking sensor plug of the ModooFree
Plus BT.
|
|
|
|
|
|
Fix the
connector with the control box label at one side of the alarm
cable (7m) to the
control box connector.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
>
It is better to arrange the cables along the left side of the
frame (by the driver's seat).
> Make certain that water cannot contact the sensor while driving.
> The main cable should be long enough to compensate for the
contours of the driver's
seat.
> The main cable should be kept away from the engine, if possible.
|
|
|
|
|
|
|
|
|
|
|
|
|
Bore
two holes on the left and right sides with a drill, so that the
bracket can be fixed with screws.
|
|
|
Attach
at the center for a 1-ton truck, and at the rear gutter for a
larger truck.
|
|
|
|
|
>>
Troubleshooting
|
|
|
|
|
> Bluetooth HandsFree Car Kit
No indication
from unit?
There is a chance the power cable plug is not correctly seated in
the cigar/utility jack socket for proper connection. Remove and
reinsert to ensure good fitting and connection.
Problem during pairing?
Repeat pairing process according to the
pairing section
Still experiencing problem?
Turn off the cellular phone and separate
the battery from the cellular phone for approximately five seconds
(In some instances, this action clears up any potential bugs built
up in the cellular phone software that can hinder proper pairing.)
Repeat pairing process as per previous pairing instructions.
Too loud?
Adjust the volume to your preferred sound
level by pressing the relevant volume switch.
Each type of Bluetooth cellular phone has different function
buttons, though highly unusual, it may be possible that the functions
operate differently with your specific phone model.
Callers are complaining about hearing noise?
Check that the microphone is secured firmly
in place and is not creating vibration and noise. Also check and
adjust microphone accordingly to ensure that it is facing towards
to the user¡¯s face.
> Parking
Sensor Kit
The sensor does not work while engaged in "Reverse".
- Check to see if the power cable is connected
to the rear light.
- Check to see if the power cable and the alarm cable are connected
to the alarm.
The sensor does not detect obstacles. Only (0.0) is
displayed.
- Check to see if the sensor cable and
alarm cable are connected.
- Check to see if the alarm cable is connected to the alarm.
- Check to see if the sensor is obstructed by dirt.
- Check to see if any sensor is detected with the earth.
|
|
|
|
>>
Safety Precautions
|
|
|
|
-
Do not expose this unit under humid environment.
- Do not drop this unit.
- Do not disassemble this unit.
- Do not press two buttons at once. This action may cause a sudden
Bluetooth disconnection.
- Do not clean the unit with any chemical or water.
- Keep this unit away from fire and dust.
- For safety reasons, please keep your phone conversation short,
do not make any notes or read documents.
It is highly recommended to park the vehicle in the safe place
before
continuing the conversation. Using a cellular
phone while driving can potentially create a
distraction for the driver which may increase
the likelihood of an accident.
- Please adjust direction of the mirror to ensure good Rearview
vision for safe driving
- Use the third-level alarm only when the obstacle is located in
a straight line from the vehicle.
- Attach the sensor level with the ground surface.
- Keep water away from the alarm (ModooFree Plus BT).
- Thin rods or objects, objects with a high tint angle, and sound-absorbing
objects cannot be detected.
- Beware that the power cable or sensor cable may be cut if excessive
force is used during
installation.
- The area just under and to the right and left ends of the rear
bumper cannot be detected.
|
|
|
